Automatically manage your nutrient and pH levels, set remote alarms and data log your progress with one simple controller. The IntelliDose by AutoGrow sets the industry standard for a small commercial auto-dosing.
Dose up to a 9 part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings.
The Intellidose controls one reservoir.
Why IntelliDose?
- You can access your control system remotely through IntelliGrow
- Dose up to 8 nutrient parts
- Run up to 4 irrigation stations
The IntelliDose Kit includes:
- IntelliDose controller
- EC probe
- pH electrode
- Sample pot with all fittings
- Calibration solutions (to get you started)
- 3 x 120ml/min Peri Pump (optional – select upon purchase)
- 24V DC 2.5A power supply with NZ/AUS, US, UK or EU Plug
- 3m USB cable
- Mounting hardware
- Instruction manual
Features:
- Controls all growing methods – NFT, DFT/DWC, soil, media, drip, and aeroponics
- Measure nutrients in EC/CF/TDS (500/640/700 scale)
- Lower or raise pH
- Able to set different EC for day and night
- Able to lower EC by adding water
- Receive SMS alerts
- Irrigation pump outputs
- Fail-safe dosing shut offs
Tech Specs:
- 9 outputs 24VDC (or same voltage as supplied by plug pack)
- Nutrient measurement units EC, CF or TDS (500/640/700)
- Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM
- Nutrient resolution to .01mS/cm, 0.1CF
- Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (temperature compensated)
- Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM
- pH resolution and accuracy – 0.1pH
- pH measurement range 2pH to 12pH
-
Nutrient and pH dosing times settable from 0 minutes to 254 minutes
Note: In order to connect the Intellidose to the internet you will need to purchase an IntelliLink (purchased separately in the store) and IntelliGrow subscription. Register for subscription here after hardware purchase: https://autogrow.com/our-products-solutions/intelligrow
This service is provided by Autogrow.